Images in climate_control
Two of the LED's had a spot effect even after grinding off the lens, so I put blue tape over them
img_6237.jpg
img_6238.jpg
img_6239.jpg
img_6240.jpg
Close-up of the LED and resistor sets
img_6242.jpg
img_6243.jpg
When removing climate control, squeeze the top and bottom pins together
After the top and bottom pins release, gently pull forward
img_6246.jpg
Close-up of climate control release pins
The dash panel needs to be pulled back from the top until it clears the top
img_6249.jpg
img_6250.jpg
Using 680ohm resistors on LEDs. AC button has a 5.6K resistor
Climate LEDs using 5.1K resistors