Blacksmithing @Sourpuss.net |
![]() |
![]() |
This forge was made from a small propane tank.
The top and bottom were cut out with a slot to hold the shelf, then the whole thing was turned on it's side and bolted to a stand.
The floor is a piece of 1/2" kiln shelving cut to 6" wide by 14" long.
I need to come up with a larger shelf for each side, as I don't have enough space to set a firebrick. For info on building this forge, see the How-to |
![]() |
![]() Starting it up |
![]() 10 PSI |
![]() Up to working temp |
![]() Watch out for the flames! |
![]() I've singed my arm-hairs a number of times by getting too close |
![]() A RR spike |
![]() |