Revision [2868]
This is an old revision of automatedDnsServerTesting made by JeffTaylor on 2012-05-06 02:39:18.
Automated tier1/tier2 server testing
Every 15 minutes, full testing is performed on each publicly listed tier2 server. The results and history of this testing may be viewed from here. You can view either tier1 or tier2 server results, and filter the display based on region. This information may be helpful in choosing reliable servers near you.
In addition, you may test a new or unlisted tier2 server for functionality. Note that your server must respond to public queries to perform this test. Visit http://www.opennicproject.org/t2log/test.php and enter your IP or hostname, then select the type of server you have.
The following tests will be performed for all servers:
- Connectivity: verify we can reach your server
- Reply size test: please visit https://www.dns-oarc.net/oarc/services/replysizetest for complete information
- Port randomness test: please visit https://www.dns-oarc.net/oarc/services/porttest for complete information
- OpenNIC root zone: confirms that you are using OpenNIC's root hints file, rather than the standard ICANN hints
- dns.opennic.glue: All tier1 and tier2 servers should have this zone configured in their DNS server setup
- OpenNIC TLD zones: checks all available TLDs to confirm you are resolving queries for each
- ICANN queries: if you are running a tier2, we want to confirm that you allow recursive lookups to answer queries for ICANN domains
After the test completes, you will get a pass/fail status. Feel free to perform this test as often as needed while configuring your server. Once your server passes all tests, and if you are willing, it may be considered for addition to the list of official servers.
